-40%
GPIO and LCD Port Adapter for OLinuXino-LIME, Plus UEXT Port

GPIO and LCD Port Adapter for OLinuXino-LIME, Plus UEXT Port

$ 2.34

Availability: 100 in stock
  • Item must be returned within: 14 Days
  • All returns accepted: Returns Accepted
  • Refund will be given as: Money Back
  • Condition: New
  • Return shipping will be paid by: Buyer
  • MPN: Does Not Apply
  • Brand: Unbranded/Generic

    Description

    GPIO and LCD Port Adapter for OLinuXino-LIME, Plus UEXT Port
    Important Note on Shipping Delays via United States Postal Service: Currently we see significant delays in shipments via USPS, up to 3 weeks (!) to deliver within the USA. If you need your item fast, we suggest you select Fedex shipping upon checkout, instead of the standard USPS shipping.
    A10-OLinuXino-LIME-UEXT
    This is an adapter board for breaking out the GPIO or LCD pins on the
    A10-OLinuXino-LIME
    ,
    A10-OLinuXino-LIME-4GB
    ,
    A20-OLinuXino-LIME
    or
    A20-OLinuXino-LIME-4GB
    board. You'll also need the
    CABLE-40-40-10CM
    2×20-pin 0.05"-pitch ribbon cable to connect this adapter to the LIME.
    NOTE: This is only for the
    original
    LIME boards mentioned above. It will not work on LIME2 boards.
    A new adapter is expected to be available soon for the LIME2 models.
    When connected to
    GPIO1
    of the LIME, it provides a UEXT port so you can connect a
    UEXT module
    to add functionality to the LIME. It also breaks out the GPIO port pins to a 0.1"-pitch IDC connector and to 0.1"-pitch pin header pads. Pins are included that you can solder to the pads.
    When connected to
    GPIO2
    or
    GPIO3
    of the LIME, the GPIO pins are broken out as explained above (but UEXT is not available).
    When connected to the
    LCD
    port of the LIME, the LCD signals are broken out, and you can connect any of the
    A13-LCD
    modules to the adapter's 2×20-pin IDC port via a
    CABLE-IDC40-15cm
    2×20-pin 0.1"-pitch ribbon cable.
    Thus, to connect an LCD to the LIME, you would connect a
    CABLE-40-40-10CM
    between the LIME's
    LCD
    port and this adapter, then connect a
    CABLE-IDC40-15cm
    between this adapter and the LCD module. (Note that the A10 LIME has been tested to work with the 4.3-inch, 7-inch and 10.1-inch A13-LCD modules; it does not work reliably with the 15.6-inch A20-LCD module.)
    However, if all you want to do is connect an LCD, there are newer
    LCD-OLinuXino
    displays available that have a direct compatible interface; you can just use one 0.05"-pitch CABLE-40-40-10CM to connect to those displays without needing this adapter.