Spectra Strip 455-248-40 Way Twist 'N' Flat Planar Ribbon Cable 1Mtr OMR4-02A

Description

Spectra Strip 455-248-40 Way Twist 'N' Flat Planar Ribbon Cable 1Mtr OMR4-02A
Spectra Strip 455-248-40 Way Twist 'N' Flat Planar Ribbon Cable 1Mtr OMR4-02A
WE ARE RICH ELECTRONICS
PURCHASERS OF
SURPLUS
ELECTRONIC COMPONENTS
AND EQUIPMENT!
For sale here we have the above 40 WAY ribbon cable…
Made in USA – measurements are imperial feet and inches
Length 40in. (approx 1 metre).
AWG28 7/36
300V
80
‘C
Insulation 0.10″
10 colour repeating pattern: brown red orange yellow green blue violet grey white and black
Each of these colours is twisted with a Tan (common) wire.
20 Twisted pairs of conductors to a flat untwisted section of ribbon ca
ble (where an IDC connector could be mounted). The distance between the centre’s of these flat sections is 20″ (approx 510mm)
Each untwisted flat section is approx 2″ (50.8mm) long
Spectra-Strip Twist ‘N’ Flat cable combines the time and cost savings of mass termination with the electrical performance of twisted pairs, making it ideal for high speed computers and communications equipment. Labour savings of up to 95% as compared to automatic strip and crimp termination are readily achieved.
Twist ‘N’ Flat cable consists of stranded round conductors insulated with colour coded PVC, twisted into pairs and laminated between layers of PVC film to form a planar cable. The twist in adjacent pairs is reversed to reduce cable crosstalk even further. Standard cables alternate 18-inch (45,7cm) long twisted pair sections with 2 inch (5,1cm) flat sections in which the conductors are laminated in parallel.
Features/Benefits
UL / CSA certified
Twisted pairs for significant crosstalk reduction
16 conductors (8 pairs) with precise spacing for controlled electrical characteristics
Double sided lamination provides excellent conductor strain relief and mass termination from either side of cable
Reduced assembly costs compared with discrete or hand lamination terminations
Product Information
RIBBON CABLE, 40 Way
Reel Length (Imperial): 100ft
Reel Length (Metric): 30.5m
No. of Conductors: 40
Conductor Size AWG: 28AWG
Pitch Spacing: 1.27mm
Conductor Area CSA: 0.072mm²
Jacket Material: PVC (Polyvinyl Chloride)
Jacket Colour: 10 Colour Repeat
with each colour twisted with a tan (common)
Voltage Rating: 300V
Approval Bodies: UL
Cable Type: Twist ‘N’ Flat Planar Ribbon Cable
Cable UL Style Number: UL2387
Capacitance: 49pF/m
Conductor Make-up: 7/36AWG
Conductor Material: Copper
Current Rating: 1A
Impedance: 100 Ohm
Insulation Resistance: 10000 Mohm
No. of Strands x Strand Size: 7 x 0.127mm
Operating Temperature Max: 105°C
Operating Temperature Min: -20°C
Standard Ribbon Cable for internal wiring of electronic equipment
Superb Quality made by Spectra Strip Ltd (Now part of Amphenol).
For further technical specifications go to:- https://www.farnell.com/datasheets/514214.pdf
This cable came to us as part of a lot of surplus stock from a large manufacturing Co. and has been kept in storage for some time, we have therefore classified it as ‘new other’. It is however in pristine condition
, stored with us still on original reels, the photographs are representative of its
excellent
condition,
and, as with all our products it comes with a full guarantee.
PLEASE NOTE!
If you have similar items to this, or indeed any electronic components that are surplus to requirements please contact us with details.
Dispatch time:
Will dispatch within 1 working day of receiving cleared payment
.
Payment
We accept the following payment methods:
PayPal
Please contact us if you have any questions.
Service
We purchase Surplus Stock. If you or your company have items similar to the above, or indeed any electronic components surplus to requirements, please contact us with details as we are keen to increase our stock profile.
Spectra-Strip Twist ‘N’ Flat cable combines the time and cost savings of mass termination with the electrical performance of twisted pairs, making it ideal for high speed computers and communications equipment. Labour savings of up to 95% as compared to automatic strip and crimp termination are readily achieved. Twist ‘N’ Flat cable consists of stranded round conductors insulated with colour coded PVC, twisted into pairs and laminated between layers of PVC film to form a planar cable. The twist in adjacent pairs is reversed to reduce cable crosstalk even further. Standard cables alternate 18-inch (45,7cm) long twisted pair sections with 2 inch (5,1cm) flat sections in which the conductors are laminated in parallel. This cable came to us as part of a lot of surplus stock from a large manuf